Ximimark 4Pcs 50Kg Body Load Cell Weighing Sensor Resistance Strain Half-Bridge Human Scale Load Sensor DIY-Fast Shipping

Description

The internal is a 1000 ohm half-bridge strain gauge, the measuring range is 50kg load cell, half bridge structure.

When measuring, the outer side is correctly applied with external force. The strain beam part of the E-shaped sensor (that is, the beam arm with the white rubber in the middle of the strain gauge) and the outer side are to form a shearing force in the opposite direction, that is, the middle The strain beam must be able to undergo a bending change under the force, and there should be no obstruction on the other side of the strain beam.

Inside the sensor is a set of half-bridge strain gauges, which can be combined with an external resistor to form a full bridge measurement. The range is one sensor range: 50kg. The external resistance is higher.

Two sensors can be used to form a full bridge measurement with a range of the sum of the two sensors: 50kg x 2 = 100kg.

Four sensors can be used to form a full bridge measurement with a range of four sensors: 50kg x 4 = 200kg.