Description
Tubeless tape: PMP tubeless tape is perfect for sticking a tubeless ready wheel. Choose the tubeless rim tape based on the channel width of your rims.
Compatibility: This tape roll is 31 mm wide and ideal for rims with a channel width between 28 mm and 31 mm. One roll is enough to completely seal two wheels with a diameter of up to 29 inches.
Recommended applications: the 31 mm wide tubeless tape is suitable for mountain bikes, downhill bikes and enduro bikes, in general for all wheels in this width range.
Tape installation: remove the tyre, place the rim upright and attach the tape 10 cm before the valve hole matches. Start sticking the tape to the circle and make sure that the tape does not overlap (pull firmly on the tape and do not worry if it stretches, in this way it has a better seal! ).
Installation of the valve: After you have glued the tape to the rim, you only need to drill a hole in the valve with a small awl. Do not make a hole larger than the valve body, otherwise there is a risk of the tubeless system not working: it is better to have a smaller hole, which is then directly enlarged by the valve itself. Finally, insert the valve and you can make your bike tubeless
Reviews
There are no reviews yet.